Unusual Rigging use TOPS MaxLoad Pro to optimise vehicle load planning for international productions and events

Unusual Rigging recently started using MaxLoad Pro software from AutoLogic Systems to automate and optimise their vehicle loading processes.

For over forty years, Unusual Rigging has led their industry of suspending, elevating and moving equipment, scenery and people for theatre, live events, museums and international sporting spectacles. Their work has featured at the Olympic and Paralympic Games, the Commonwealth Games, Silverstone Grand Prix and Eurovision, as well as West End productions such as Starlight Express and Les Miserables.

On a typical week, Unusual Rigging fulfils around 5–13 projects. Most projects require approximately 2–4 vehicles, although major events such as the Olympics or Commonwealth Games can involve up to 40 vehicles for a single project. Loads consist of standardised case sizes alongside customised and irregular items such as truss, scaffolding and ladder beams, which often require specific stacking and placement rules. Vehicle types range from small vans through to articulated lorries.

Unusual Rigging recently started using MaxLoad Pro software from AutoLogic Systems to automate and optimise their vehicle loading processes.

https://www.autologic-systems.co.uk/wp-content/uploads/2026/09/Unusual-Rigging-Load-Plan-1280x640.jpg
https://www.autologic-systems.co.uk/wp-content/uploads/2026/09/Unusual-Rigging-Load-Plan-Actual-1280x640.jpg

Pre MaxLoad Pro

Before introducing MaxLoad Pro, Yard Manager Steve Boot manually configured each vehicle load plan using pen and paper. The process took around 20 minutes for each plan, plus last-minute changes, and relied heavily on his personal experience and knowledge.

The system was both unsustainable and increasingly inefficient for the growing number of larger projects Unusual Rigging was fulfilling.

Steve and the team were keen to find a solution that would automate the majority of the planning process and optimise their vehicle fill, whilst still having the flexibility to include irregular custom equipment and ensure all items maintained their relationship to each other.

When comparing the solutions available, Unusual Rigging were confident that MaxLoad Pro was the only option that could meet their requirements.

With MaxLoad Pro, container and vehicle loads are planned with intelligent algorithms utilising extensive stacking rules, vehicle-specific characteristics and mixed SKU cargo.

 

Onboarding MaxLoad Pro

With the assistance of the AutoLogic Systems technical team, Asset Tracking and Stock Control Administrator Richard Torok started to model their SKU catalogue and loading rules within MaxLoad Pro. This comprised standard cases and irregular customised items with dimensions, orientations and weights together with the specific stacking and placement rules.

For example, motor boxes would usually be stacked in a single layer, occasionally two if lightweight, but never three due to weight and health & safety. And when mixing with items such as long scaffold beams or depending on the vehicle being used, the motor-box stacking height might be adjusted. Unusual Rigging were keen for MaxLoad Pro to mimic as much of this logic as possible.

Another customisation that was configured was the ability to specify the percentage fill of a vehicle, e.g. ask MaxLoad Pro to only fill to 90%, leaving a gap at the end of the vehicle to allow for more flexibility and last-minute additions on specific projects.

The benefits and savings

Steve says: “The time taken to plan each vehicle load has reduced from 20 minutes to 5 minutes with MaxLoad Pro. This equates to a time saving of between 2 and 10 hours each week.

“Across the year, we deal with approximately 700 vehicle loads. Previously, planning this volume would have required around 175 hours of load planning. With MaxLoad Pro, this has been reduced to approximately 60 hours per year, saving around 115 hours of load-planning time annually.

“We’re also able to share the load plans with stakeholders and venues. The response has been really positive and the team no longer have to explain any load plans as they’ve already been proven in the software.

“Sometimes, when venues are reloading at the end of an installation, they might request a wrong-sized vehicle and Unusual Rigging would either have to supplement it with an additional vehicle or waste space in a vehicle that was too large. MaxLoad Pro enables us to specify the optimal-sized vehicle, ensuring no wasted vehicle costs, travel time or space.

“The loads are also coming back tidier and as expected, making them easier and quicker to offload back at Unusual Rigging.”

Richard adds: “We’re also able to edit load plans with any inevitable last-minute changes or add our own personal logic and preferences.

“We’re continuously adding new custom SKUs to the catalogue and experimenting more and more with each load plan. We’re also keen to roll out the plans to more third-party partners and venues for greater efficiency across entire projects.

“AutoLogic Systems have been great to work with and really responsive. We usually get responses within a couple of hours for any technical help when we need it.”

About Us

Advanced Digital Solutions for Industry. Dynamic Digital Twins, Packing Optimisation, Asset Conditioning & much more.

Contact us

01844 281380

info@autologic-systems.co.uk